DIY Super Bright Flashlights: Crafting with Imalent

Are you trying to figure out how to create your own super bright flashlight? Look no further than Imalent! With the world’s brightest flashlight, the MS18, and the brightest and smallest flashlight, the LD70, Imalent offers everything you need to make a DIY flashlight that will light up any situation.

In this article, we will share everything you need to know in order to make a super bright flashlight with Imalent, including the six objects that make up a flashlight, the materials needed, step-by-step instructions, and how to make one using household items.

What 6 objects make up a flashlight?

Before we dive into the DIY process, it’s important to understand the six objects that make up a flashlight. These objects are:

  1. Bulb or LED: The source of light.
  2. Reflector: The object that reflects the light to focus it.
  3. Lens: The object that covers the bulb or LED and helps to focus the light beam.
  4. Switch: The object that turns the flashlight on and off.
  5. Batteries: The source of power for the flashlight.
  6. Body or housing: The container that holds all the objects together.

How to make a super bright flashlight?

 Now that you know the six objects that make up a flashlight, it’s time to make your own super bright flashlight with Imalent. Here’s what you’ll need:

  • Imalent MS18 or Imalent LD70 (depending on your preference)
  • Reflector
  • Lens
  • Switch
  • Batteries
  • Body or housing
  • Soldering iron
  • Solder
  • Wire cutters
  • Screwdriver
  • Glue

Here are the steps to follow:

  1. Disassemble the Imalent flashlight to access the components.
  2. Remove the reflector and lens from the flashlight.
  3. Install the new reflector and lens in the same position as the old ones.
  4. Install the new switch in the same position as the old one.
  5. Replace the batteries with new ones.
  6. Reassemble the flashlight.

What materials are used to make a flashlight?

The materials used to make a flashlight can vary, but the most common materials include:

  • Aluminum: used for the body or housing
  • Plastic: used for the switch and lens
  • Glass: used for the lens

How to make a battery flashlight?

If you don’t have an Imalent flashlight, you can still make a DIY flashlight using household items. Here’s what you’ll need:

  • Empty toilet paper roll
  • Aluminum foil
  • LED light
  • 3V battery
  • Electrical tape

Here are the steps to follow:

  1. Cover the toilet paper roll with aluminum foil.
  2. Poke two holes in the side of the roll.
  3. Insert the LED light into one of the holes and the battery into the other hole.
  4. Tape the battery and the LED light in place.
  5. Cover the entire roll with electrical tape.

How do you make a flashlight with household items?

In addition to the battery flashlight, there are other household items you can use to make a DIY flashlight. Here are a few options:

  • Water bottle flashlight: Fill a clear water bottle with water and shine a light into it to create a makeshift flashlight.
  • Potato flashlight: Cut a potato in half, hollow out the inside, and insert a nail and a penny into each half. Connect a wire to each metal object, and attach a small light bulb to the end of the wires. Connect the wires to a battery to power the light bulb.

Glow stick flashlight: Break a glow stick to activate the chemicals, and place it inside a clear plastic container. The container will help focus the light and make it brighter.

How to Pick the Right LED for Your DIY Flashlight

One of the most essential components of a DIY flashlight is the LED, which is responsible for producing the light. With so many options on the market, it can be difficult to know which LED is right for your project. Here are some of the important factors to consider when choosing an LED for your DIY flashlight:

  1. Brightness: The brightness of an LED is measured in lumens, and you’ll want to choose an LED with a brightness that suits your needs. Keep in mind that higher lumens require more power and can also generate more heat.
  2. Efficiency: LEDs are available in different efficiencies, with some using less power than others to produce the same amount of light. Consider choosing an LED with a high efficiency to help extend the battery life.
  3. Color temperature: LEDs come in different color temperatures, which can affect the color of the light produced. Cool white LEDs have a blue-ish tint and are often used for outdoor and industrial applications, while warm white LEDs have a yellow-ish tint and are often used for indoor lighting.
  4. CRI: The Color Rendering Index (CRI) is a measure of how accurately an LED can reproduce colors. A higher CRI generally means more accurate colors, but can also mean a lower brightness.
  5. Beam angle: The beam angle of an LED determines how wide or narrow the light is spread. A narrow beam angle is more focused and can be useful for long-range lighting, while a wide beam angle is better for flood lighting and illuminating larger areas.

By considering these factors, you can choose an LED that will help make your DIY flashlight project a success.

What is the world’s brightest flashlight? 

Imalent holds the title for the world’s brightest flashlight with its MS18 model. The MS18 can produce up to 100,000 lumens of brightness, making it perfect for outdoor adventures, search and rescue operations, and emergency situations.

What’s the world’s brightest and smallest flashlight?

Imalent’s LD70 is the world’s brightest and smallest flashlight, packing up to 4,000 lumens of brightness into a compact design. With a sleek and durable aluminum body, the LD70 is perfect for everyday carry and emergency situations.


In conclusion, making a super bright flashlight is easy with Imalent. Whether you’re using their high-powered flashlights or household items, you can create a reliable source of light for any situation. So, grab your materials and get started on your DIY flashlight today!

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.